Nano 90
Ultra Compact Fanless PSU

Designed to provide silent ATX power for low power SFF computing, the Nano90 fanless PSU fits perfectly into all Streacom cases but can also be used as a silent PSU solution for any low power ATX system.

As with all NANO style power supplies, its comprised of a 2 part solution, an external AC to DC adapter and an internal DC to DC board. This allows for incredibly compact builds as the bulk of the power supply is external and can be placed somewhere discreet. It also has the benefit of reducing the amount of heat being dumped inside the case, something that is beneficial for fanless builds.

Featuring 90W* of combined total power output, under & over output power protection, short safety protection, and connections for ATX24, SATA, IDE and 4PIN CPU power, the Nano90 is the natural choice for any low power ultra-compact SFF build.

The Nano90 also fully complies with low power (LVDS, ERP/EUP) requirements and has 89% + efficiency for low environmental impact.


  • Can I use my own AC Adapter with the DC to DC Converter?
    In principle yes, as long as the AC adapter is of suitable quality, outputs the same regulated 12V DC output and at the required current rating, it can be used .
  • The PSU only has a 4PIN AUX CPU Power connector but my motherboard has an 8PIN, what should I do?
    The main reason for the 8PIN compared with the 4PIN AUX CPU Power connector is to supply more current to the CPU. For most motherboards, the terminals actually connect to the same power lines, the connections are just doubled to overcome the connectors power limit. On the majority of motherboards, it won’t make a difference and the system will still boot and function normally with only the 4PIN connected. The 8PIN would only be required for overclocking stability or high TDP CPUs (above 75W). As our power supplies have been designed for lower power systems, they would not exceed the maximum power that a single 4PIN connector could supply, which is why we don’t currently produce a power supply with an 8PIN connector. If the motherboard does fail to boot, it is possible to use a splitter (4PIN to 8PIN) or a Molex to 4PIN in order to provide the 8PIN power for the motherboard.
  • What if I have a question that is not listed?
    If you can’t find the information you need, please send us a message using the ‘Get in Touch’ link at the top right of the page, choose the appropriate department and we will respond with the relevant information.
  • There are currently no downloads available for this product. If there is something missing, please get in touch and we do our best to make it available.

    We are here to help!

    Get in Touch

    Page 1 of 2 - Let's get your details
    Page 2 of 2 - How can we help?
    CAPTCHA image