Cooler

There have been a few CPU cooler mounting hole changes over the years and we have released various brackets to accommodate for those such as the AM1 or AM4. In order to provide a more unified and flexible upgrade path for older cases, we are making our current adjustable arm design available as a kit for existing FC case owners. This allows the included CPU mount to be used with all current (and hopefully future) CPUs by simply replacing the older upper mount with the UM2 kit.
Materials: Aluminium Mount, Steel Arms and Screws
Dimensions: Upper Mount – 56x56x3mm
Kit Contents: 1 x Upper Mount, 4 x Arm, 4 x Hex Screw
Compatible Chassis: FC5, FC8, FC9, FC10, Evo & Older*1 Alpha Generation Fanless Cases
Compatible CPU Socket: All current Intel and AMD sockets


*1 All current Alpha cases already include the universal CPU mount
None
The GPU cooling kit was designed to bring silent performance/gaming to the DB4 by allowing a discreet graphics card to be passively cooled using one of the side panels. It comprises of a GPU mount, heat sink mount, heat pipes, universal bracket and VRAM coolers, everything needed to cool a graphics card without the need of a fan. The GPU mount features adjustable arms to accommodate any variation in the card mounting and combined with the flexible heat sink mounting design of the DB4, allows for virtually any compact graphics card to be used.
Recommended GPU TDP: 65W, 75W Max
Number of Heatpipes: 4
Number of Heatsink Mounts: 1
Number of Universal Brackets: 1
Heatpipe Diameter: 6mm
Compatible Chassis: DB4
The new AM4 architecture introduces slightly different hole spacing (90x54mm) compared with the current AMD mounting plate (96x48mm) supplied with our ‘FC’ fanless cases such as the FC8, which means its not compatible. The Streacom AM4 CPU mount allows existing ‘FC’ Alpha and Evo products to use AMD AM4 based CPUs.
Materials: Aluminium
Dimensions: 104x60x3mm
Compatible Chassis: FC5, FC8, FC9, FC10, Evo & Alpha Generation Fanless Cases
Compatible CPU Socket: AMD Socket FM1, FM2, AM2, AM3, AM4

None
The LH6 Kit for DB4 was designed to expand the CPU cooling from a single side panel to two side panels. It comprises of heat pipes, heak sink connectors, universal brackets and thermal pads/paste. When assembled correctly and with the appropriate environmental conditions, the total cooling performance can reach 105W* of heat dissipation. Whilst the stock DB4 heat pipes have been designed to work with virtually any motherboard layout, the LH6 will require a compatible CPU location and motherboard, see our system build guide for more details.
Number of Heatpipes: 3
Number of Heatsink Mounts: 2
Number of Universal Brackets: 2
Heatpipe Diameter: 6mm
Heatpipe Reach: 117mm
Compatible Chassis: DB4
The Streacom HT4 thermal riser has been designed to be used in conjunction with our new heatpipe direct touch passive CPU cooling solution and greatly increases motherboard compatibility by raising the heatpipes above conflicting components. Currently compatible with our FC9, FC10 and FC8, FC9 and FC10 ALPHA series chassis, the HT4 gives the included heatpipe solution an additional 32mm of clearance above the CPU.
Number of Heatpipes: 4
Heatpipe Diameter: 6mm
Additional Motherboard Clearance: 32mm
Compatible Chassis: FC9, FC10, and FC8, FC9, FC10 Alpha Series
Compatible CPU Socket: See System Build Guide (Socket Support)
Baseplate Material: Aluminium
Lost or damaged the heatpipes supplied with your FC5, FC9 or FC10? Trying to do some custom modding? Perhaps you just like the look of copper heatpipes? Not a problem, the SH2 kit contains a full set of standard length heatpipes to so with as you wish.
Number of Heatpipes: 4
Heatpipe Diameter: 6mm
Heatpipe Length: 117mm
Compatible Chassis: FC5, FC9, FC10 Evo + Alpha, and FC8 Alpha
Material: Copper
  • [No Downloads found]
Lost or damaged the heatpipes supplied with your FC8 Evo or Alpha? Trying to do some custom modding? The SH8 kit contains a full set of standard length heatpipes designed to fit the FC8 and provides compatibility for Thin-ITX motherboards as well as motherboards with a center/left bias CPU location.
Number of Heatpipes: 4
Heatpipe Diameter: 6mm
Heatpipe Length: 150mm
Compatible Chassis: FC8 Evo & Alpha
Material: Copper
  • [No Downloads found]
Designed to replace the stock heatpipes supplied with FC5, FC9 and FC10 Chassis, the LH4 kit contains a full set of extended length heatpipes which gives an additional 30mm of reach. This increases the choice of compatible motherboards, allowing ones with left positioned CPU sockets to be used. (see our system build guide)
Number of Heatpipes: 4
Heatpipe Diameter: 6mm
Heatpipe Length: 147mm
Compatible Chassis: FC5, FC9, FC10
Material: Copper
  • [No Downloads found]
Designed to replace the stock heatpipes supplied with the FC8 Evo, the MH1 kit contains a full set of mini heatpipes. These shorter heatpipes have been specifically designed to allow for motherboards with CPU socket locations that are positioned towards the right side of the motherboard (close to the heatsink sidepanel), greatly expanding the range of motherboards that are compatible with the FC8 Evo. For more information on the CPU socket coverage area and example motherboards, see our system build guide.
Number of Heatpipes: 4
Heatpipe Diameter: 6mm
Heatpipe Length: 94mm
Compatible Chassis: FC8 Evo & Alpha
Material: Copper
  • [No Downloads found]
The Streacom AM1 CPU mount brings support for AMD socket AM1 to existing FC9, FC10 and Evo products. If you already purchased a Streacom case but are planning to upgrade your motherboard to a socket AM1, this product is for you.
Materials: Aluminium
Dimensions: 90x90x3mm
Compatible Chassis: FC9, FC10, Evo Generation Fanless Cases
Compatible CPU Socket: AMD Socket AM1

None