MH1 – Heat Pipe Set
Designed to replace the stock heatpipes supplied with the FC8 Evo, the MH1 kit contains a full set of mini heatpipes. These shorter heatpipes have been specifically designed to allow for motherboards with CPU socket locations that are positioned towards the right side of the motherboard (close to the heatsink sidepanel), greatly expanding the range
NC2 – Fanless NUC Case
The Intel® NUC platform was designed to deliver full size computing power in a TINY package and the NC2 stays true to that vision. At only 59mm, the NC2 is only 11mm taller than the NC1 but provides the additional internal space to fit a 2.5″ drive. The NC2 also keeps all of the great
ZF240 – Fanless PSU
The Streacom ZF240 has been designed to push the limits of compact and silent computing power. Encased in an all aluminium enclosure which is based on the Flex form factor (81.5×41.5x150mm), the ZeroFlex can deliver 240W of combined power without the need for any active cooling. This has been achieved by the use of high
Flirc – Adaptive IR Reciever
The FLIRC-SE (Streacom Edition) brings you all the amazing features of FLIRC, but in a package designed to fit inside Streacom cases and with the additional advantage of power on from S4/S5 power states*. For those of you who don’t know, FLIRC is the #1 solution for PC IR control and incredibly easy and flexible
NC1 – Fanless NUC Case
Designed for the Next Unit of Computing (NUC) platform, the NC1 delivers silent computing in an impossibly small package. The case is modular, meaning that the front, rear and CPU cooler can be replaced to accommodate future NUC motherboards and its acrylic sides allow for internal WiFi (using our InFi2 Antenna) and Bluetooth signals to
FC10 – Fanless ATX Case
The FC10 follows the same vision as the FC9, a stunning design that delivers new levels of compatibility and performance, but with a 435mm wide form factor that perfectly complements any home theatre setup. The all-aluminium sandblasted finish houses a multitude of features such as heat pipe Direct Touch cooling, universal optical drive eject button
HT4 – Thermal Riser
The Streacom HT4 thermal riser has been designed to be used in conjunction with our FC series cases in order to expand motherboard compatibility by raising the heat pipes above conflicting components. Compatible with the FC9, FC10 and FC8 V3 chassis, the HT4 mounts directly to the CPU IHS, improving performance thanks to heat pipe
FC9 – Fanless Micro-ATX Case
The FC9 follows the same design vision as the FC10, featuring a minimalist curved exterior and exceptional hardware compatibility but in a more compact, mid-sized form factor that has a 30% smaller footprint. The all-aluminium sandblasted finish houses a multitude of features such as Heatpipe Direct Touch cooling, universal optical drive eject button and a
FC8 – Fanless Mini-ITX Case
With a volume of just 6ℓ but with a maximum TDP of 95W* the FC8 is a marvel of both thermal performance and minimalist design. The small, sleek all aluminium construction features a highly efficient heat sink that minimises the industrial look by blending it with the outer curves of the case. Front connectivity is
F7C – Mini-ITX Case
The F7C is a compact, space efficient ITX case with a clean aesthetic, simple curved panel design with a good balance of hardware support for lower power desktop builds. Being just 6l in volume, its still features support for low profile cards and 3.5″ drives, including an optical version for media application. Constructed entirely from