As the BC1 Mini is an open testbench style case, there is no actual physical limit to the size of the card that will fit; the only limitation is one of practicality (e.g. will it be awkward to handle) and one of weight distribution. With a card that extends far beyond the edge of the table, we suggest making sure the PSU is installed first to ensure the centre of mass keeps the table from tipping. Most (if not all) current large GPUs can be used with the BC1 Mini

The V1 of the BC1 Open Benchtable didn't include any options for the motherboard power on/off or reset as it was primarily designed with overclockers in mind and they tended to use motherboards with built-in buttons for these. When the V2 was released, we added 12mm holes at the lower edge of the BC1 to allow for standard panel mount switches to be fitted. We have also released a customised panel switch for the BC1 that can be purchased separately from our shop - https://shop.streacom.com/products/12mm-panel-mount-switch-led

**UPDATED AUGUST 2022** Whilst we have widened the feet on the BC1 Mini V2 to leave more room for the switch, some PSU vendors still have switch placement very close to the edge of the PSU making it difficult to attach the PSU to the foot. We have now produced a standoff (originally designed and included with the DA6) to space the PSU away from the foot leaving a gap that allows the switch to clear the foot. This PSU spacer can be used with any PSU and with the BC1 Mini V1 and V2 - LINK TO PSU SPACER   **Previous Answer for reference only** Note, that this applies to the V1 only, the BC1 Mini V2 features a winder foot design for improved PSU compatibility. This is a known compatibility issue with some Corsair SFX PSUs as the placement of the power switch is very close to the edge of the PSU enclosure. There is currently a limitation of the BC1 Mini design, but there is a workaround that can be used by using spacers to leave a gap between the PSU and foot. This will allow enough clearance for the PSU switch but will require the use of longer screws (~14mm in length) as the thumbscrews supplied will be too short.

The BC1 was designed with portability in mind, so absolutely! The BC1 has travelled through customs and security checks at several airports around the world (incl. TSA in the US, France and Taiwan) without issue. However, there is no guarantee where hand luggage is concerned, so best to place it in check-in language.

It should be no surprise that they are identical as it was a collaboration. The only difference is that the Open Benchtable ships with a travel sleeve and must be purchased directly from their website.

Whilst we are considered in many ways a boutique manufacturer, its not possible for us to produce customised versions of our cases as one-offs or in limited numbers to cater for individual requirements and modifications. We are however able to offer a customisation service for businesses (OEM / ODM) and depending on the product and type of modification, this becomes viable at relatively low volumes.

If you can't find the information you need, please send us a message using the 'Get in Touch' link at the top right of the page, choose the appropriate department and we will respond with the relevant information.