DA2 – Vertical GPU Kit

Until recently, the majority of performance graphics cards have required no more than 2 slots, however, the current trend is towards 2.5 and 3 slot cards. Whilst the DA2 can accommodate some 2.5 slot cards, the Vertical GPU Kit provides an alternative solution for thicker cards allowing them to comfortably fit by rotating the orientation […]

E2C – USB Type-C 3.1 G2 Cable

The USB E2C cable is designed as a direct replacement for the existing USB Type-C 3.0 19Pin cable pre-installed in the case, bringing support for newer motherboards that feature USB3.1 Gen2 ports. Suitable for cases that feature our Type-C front I/O module, installation is easily done by replacing the existing cable secured by 2 screws […]

DXX – Type-A Front I/O Module

USB Type-C may be the future port of choice for all devices, but not everyone or every device is using it yet. With that in mind and to allow for upgrades to next-generation ports, the front I/O on the DA2 was designed to be replaceable, giving customers choice and an upgrade path without having to […]

DA2 – Performance Acrylic Panels

With the introduction of the tempered glass side panels, adequately cooling high-performance components in the DA2 can become a challenge if not properly considered as airflow from the side panels is no longer available. To offset this airflow restriction and give additional cooling potential we have created an alternative design for the upper/lower acrylic panels […]

DA2 – Vertical & Horizontal Brackets

Additional vertical and horizontal brackets are available for the DA2 allowing for more hardware or complex components to be installed in the case. The brackets are supplied as a set (either 2 x Vertical or 2 x Horizontal) and include the screws and nuts used for mounting the brackets to the frame. Material Steel 1.5mm […]

DA2 – Tempered Glass Kit

Whilst our design language leans towards understated system builds, glass is a beautiful material and we do concede that some hardware should definitely be put on display, so here it is, the tempered glass side panel kit for the DA2. The kit consists of a lightly tinted windowed glass side panel for your hardware viewing […]

DB4 – Optical Drive Kit

Designed specifically for the DB4, the optical drive kit adds support for a slim slot-loading drive to the DB4. The kit included an optical drive tray that allows the drive to be mounted to the back of the motherboard tray and an acrylic top panel with a slot cutout for access to the drive. Drives […]

BC1 – Screw Kit

The BC1 Screw Kit allows you to expand or replace existing BC1 Open Benchtable parts. Each contains 4x pushpin standoffs, 4x regular standoffs, 8x M3 thumbscrews, 6 x 6#32 thumbscrews and 2x PCI thumbscrews with nuts. M3 Thumbscrew x 7 General purpose M3 thread 6#32 Thumbscrew x 6 General purpose 6#32 thread M3 Standoff x […]

Flirc – Adaptive IR Reciever

The FLIRC-SE (Streacom Edition) brings you all the amazing features of FLIRC, but in a package designed to fit inside Streacom cases and with the additional advantage of power on from S4/S5 power states*. For those of you who don’t know, FLIRC is the #1 solution for PC IR control and incredibly easy and flexible […]