UM2 – Universal CPU Mount

There have been a few CPU cooler mounting hole changes over the years and we have released various brackets to accommodate for those such as the AM1 or AM4. In order to provide a more unified and flexible upgrade path for older cases, we are making our current adjustable arm design available as a kit

DB4 – CPU Cooling Expansion Kit

The LH6 Kit for DB4 was designed to expand the CPU cooling from a single side panel to two side panels. It comprises of heat pipes, heak sink connectors, universal brackets and thermal pads/paste. When assembled correctly and with the appropriate environmental conditions, the total cooling performance can reach 105W* of heat dissipation. Whilst the

DB4 – GPU Cooling Kit

The GPU cooling kit was designed to bring silent performance/gaming to the DB4 by allowing a discreet graphics card to be passively cooled using one of the side panels. It comprises of a GPU mount, heat sink mount, heat pipes, universal bracket and VRAM coolers, everything needed to cool a graphics card without the need

MH1 – Heat Pipe Set

Designed to replace the stock heatpipes supplied with the FC8 Evo, the MH1 kit contains a full set of mini heatpipes. These shorter heatpipes have been specifically designed to allow for motherboards with CPU socket locations that are positioned towards the right side of the motherboard (close to the heatsink sidepanel), greatly expanding the range

HT4 – Thermal Riser

The Streacom HT4 thermal riser has been designed to be used in conjunction with our FC series cases in order to expand motherboard compatibility by raising the heat pipes above conflicting components. Compatible with the FC9, FC10 and FC8 V3 chassis, the HT4 mounts directly to the CPU IHS, improving performance thanks to heat pipe

SH8 – Heat Pipe Set

Lost or damaged the heat pipes supplied with your FC8 Evo or need support for the alternative CPU socket location on your motherboard? Trying to do some custom modding? The SH8 kit contains a full set of heat pipes designed to fit the FC8 and provides compatibility for Thin-ITX motherboards as well as motherboards with

SH2 – Heat Pipe Set

Lost or damaged the stock heat pipes supplied with your FC5, FC8, FC9 or FC10? Trying to do some custom modding? Perhaps you just like the look of copper heat pipes? Not a problem, we got you covered with the SH2 heat pipe set, a kit that contains a full set of stock heat pipes

LH4 – Heat Pipe Kit

Designed to replace the stock heat pipes supplied with FC5, FC9 and FC10 Chassis, the LH4 kit contains a full set of extended length heat pipes which gives an additional 30mm of reach to the motherboard CPU location. This increases compatibility with motherboards, allowing ones with left positioned CPU sockets to be used. Material Cu