VU1 – Dynamic Analogue Dials

Moving coil dials are nothing new, they have been around since the invention of galvanometer devices in the 1800s and are more commonly associated with audio equipment in the era of analogue audio where it was used to represent volume (hence VU, Volume Unit). What makes this kind of display appealing is its mechanical motion,

TX13 – High Performance Thermal Paste Without the Waste

Streacom TX13 was designed to take the guesswork out of applying thermal paste and help reduce the environmental impact of packaging, especially those applicator tubes. To reduce plastic packaging waste, TX13 is supplied in a recycled card envelope that contains coated foil sachets and without a plastic spreader, not that you really need one for

DA2 – Vertical GPU Kit

Until recently, the majority of performance graphics cards have required no more than 2 slots, however, the current trend is towards 2.5 and 3 slot cards. Whilst the DA2 can accommodate some 2.5 slot cards, the Vertical GPU Kit provides an alternative solution for thicker cards allowing them to comfortably fit by rotating the orientation

E2C – USB Type-C 3.1 G2 Cable

The USB E2C cable is designed as a direct replacement for the existing USB Type-C 3.0 19Pin cable pre-installed in the case, bringing support for newer motherboards that feature USB3.1 Gen2 ports. Suitable for cases that feature our Type-C front I/O module, installation is easily done by replacing the existing cable secured by 2 screws

DXX – Type-A Front I/O Module

USB Type-C may be the future port of choice for all devices, but not everyone or every device is using it yet. With that in mind and to allow for upgrades to next-generation ports, the front I/O on the DA2 was designed to be replaceable, giving customers choice and an upgrade path without having to

DA2 – Vertical & Horizontal Brackets

Additional vertical and horizontal brackets are available for the DA2 allowing for more hardware or complex components to be installed in the case. The brackets are supplied as a set (either 2 x Vertical or 2 x Horizontal) and include the screws and nuts used for mounting the brackets to the frame. Material Steel 1.5mm

DA2 – Tempered Glass Kit

Whilst our design language leans towards understated system builds, glass is a beautiful material and we do concede that some hardware should definitely be put on display, so here it is, the tempered glass side panel kit for the DA2. The kit consists of a lightly tinted windowed glass side panel for your hardware viewing

UM2 – Universal CPU Mount

There have been a few CPU cooler mounting hole changes over the years and we have released various brackets to accommodate for those such as the AM1 or AM4. In order to provide a more unified and flexible upgrade path for older cases, we are making our current adjustable arm design available as a kit

DB4 – CPU Cooling Expansion Kit

The LH6 Kit for DB4 was designed to expand the CPU cooling from a single side panel to two side panels. It comprises of heat pipes, heak sink connectors, universal brackets and thermal pads/paste. When assembled correctly and with the appropriate environmental conditions, the total cooling performance can reach 105W* of heat dissipation. Whilst the

DB4 – GPU Cooling Kit

The GPU cooling kit was designed to bring silent performance/gaming to the DB4 by allowing a discreet graphics card to be passively cooled using one of the side panels. It comprises of a GPU mount, heat sink mount, heat pipes, universal bracket and VRAM coolers, everything needed to cool a graphics card without the need