BC1 VGPU – Vertical GPU Kit
With the release of the BC1 Open Benchtable V2, we introduced vertical mode as a native feature. Enable it by reorienting the feet, it opened up new possibilities for showpiece builds. Today’s graphics cards are often the centerpiece of an enthusiast’s setup but have become larger and heavier, creating new demands for secure installation and
BC1 SMR – Side Mounted Rail Kit
The SMR (Side Mounted Rail) Kit opens up a world of options for mounting hardware to the BC1 (and BC1 Mini). The BC1 has always featured mounting points along its edges (left, right and front) that when paired with the included brackets, allowed for fans, radiators and other hardware to be secured. The SMR kit
VU1 – Dynamic Analogue Dials
Moving coil dials are nothing new, they have been around since the invention of galvanometer devices in the 1800s and are more commonly associated with audio equipment in the era of analogue audio where it was used to represent volume (hence VU, Volume Unit). What makes this kind of display appealing is its mechanical motion,
TX13 – High Performance Thermal Paste Without the Waste
Streacom TX13 was designed to take the guesswork out of applying thermal paste and help reduce the environmental impact of packaging, especially those applicator tubes. To reduce plastic packaging waste, TX13 is supplied in a recycled card envelope that contains coated foil sachets and without a plastic spreader, not that you really need one for
DA2 – Vertical GPU Kit
Until recently, the majority of performance graphics cards have required no more than 2 slots, however, the current trend is towards 2.5 and 3 slot cards. Whilst the DA2 can accommodate some 2.5 slot cards, the Vertical GPU Kit provides an alternative solution for thicker cards allowing them to comfortably fit by rotating the orientation
E2C – USB Type-C 3.1 G2 Cable
The USB E2C cable is designed as a direct replacement for the existing USB Type-C 3.0 19Pin cable pre-installed in the case, bringing support for newer motherboards that feature USB3.1 Gen2 ports. Suitable for cases that feature our Type-C front I/O module, installation is easily done by replacing the existing cable secured by 2 screws
DXX – Type-A Front I/O Module
USB Type-C may be the future port of choice for all devices, but not everyone or every device is using it yet. With that in mind and to allow for upgrades to next-generation ports, the front I/O on the DA2 was designed to be replaceable, giving customers choice and an upgrade path without having to
DA2 – Vertical & Horizontal Brackets
Additional vertical and horizontal brackets are available for the DA2 allowing for more hardware or complex components to be installed in the case. The brackets are supplied as a set (either 2 x Vertical or 2 x Horizontal) and include the screws and nuts used for mounting the brackets to the frame. Material Steel 1.5mm
DA2 – Tempered Glass Kit
Whilst our design language leans towards understated system builds, glass is a beautiful material and we do concede that some hardware should definitely be put on display, so here it is, the tempered glass side panel kit for the DA2. The kit consists of a lightly tinted windowed glass side panel for your hardware viewing
UM2 – Universal CPU Mount
There have been a few CPU cooler mounting hole changes over the years and we have released various brackets to accommodate for those such as the AM1 or AM4. In order to provide a more unified and flexible upgrade path for older cases, we are making our current adjustable arm design available as a kit
DB4 – CPU Cooling Expansion Kit
The LH6 Kit for DB4 was designed to expand the CPU cooling from a single side panel to two side panels. It comprises of heat pipes, heak sink connectors, universal brackets and thermal pads/paste. When assembled correctly and with the appropriate environmental conditions, the total cooling performance can reach 105W* of heat dissipation. Whilst the
DB4 – GPU Cooling Kit
The GPU cooling kit was designed to bring silent performance/gaming to the DB4 by allowing a discreet graphics card to be passively cooled using one of the side panels. It comprises of a GPU mount, heat sink mount, heat pipes, universal bracket and VRAM coolers, everything needed to cool a graphics card without the need
DB4 – Optical Drive Kit
Designed specifically for the DB4, the optical drive kit adds support for a slim slot-loading drive to the DB4. The kit included an optical drive tray that allows the drive to be mounted to the back of the motherboard tray and an acrylic top panel with a slot cutout for access to the drive. Drives
MH1 – Heat Pipe Set
Designed to replace the stock heatpipes supplied with the FC8 Evo, the MH1 kit contains a full set of mini heatpipes. These shorter heatpipes have been specifically designed to allow for motherboards with CPU socket locations that are positioned towards the right side of the motherboard (close to the heatsink sidepanel), greatly expanding the range
Flirc – Adaptive IR Reciever
The FLIRC-SE (Streacom Edition) brings you all the amazing features of FLIRC, but in a package designed to fit inside Streacom cases and with the additional advantage of power on from S4/S5 power states*. For those of you who don’t know, FLIRC is the #1 solution for PC IR control and incredibly easy and flexible
HT4 – Thermal Riser
The Streacom HT4 thermal riser has been designed to be used in conjunction with our FC series cases in order to expand motherboard compatibility by raising the heat pipes above conflicting components. Compatible with the FC9, FC10 and FC8 V3 chassis, the HT4 mounts directly to the CPU IHS, improving performance thanks to heat pipe
SH8 – Heat Pipe Set
Lost or damaged the heat pipes supplied with your FC8 Evo or need support for the alternative CPU socket location on your motherboard? Trying to do some custom modding? The SH8 kit contains a full set of heat pipes designed to fit the FC8 and provides compatibility for Thin-ITX motherboards as well as motherboards with
SH2 – Heat Pipe Set
Lost or damaged the stock heat pipes supplied with your FC5, FC8, FC9 or FC10? Trying to do some custom modding? Perhaps you just like the look of copper heat pipes? Not a problem, we got you covered with the SH2 heat pipe set, a kit that contains a full set of stock heat pipes
LH4 – Heat Pipe Kit
Designed to replace the stock heat pipes supplied with FC5, FC9 and FC10 Chassis, the LH4 kit contains a full set of extended length heat pipes which gives an additional 30mm of reach to the motherboard CPU location. This increases compatibility with motherboards, allowing ones with left positioned CPU sockets to be used. Material Cu